Saturday, February 9, 2013

More frugal woodworking

 The problem is the lathe and stand are too light and need some weight


New Delta 46-460 lathe with free stand


Scraps of walnut

glue up of shorts - some stain and you have a workable panel

Lathe with stand and weight
Posted by Picasa

Sunday, February 3, 2013

2012 Dec - Going insane before heading to Vietnam

Pretty nervous about heading to Vietnam for the first time.  Used the nervous energy to use and built a bunch of stuff for the woodshop.



A homemade Sysport underneath the hand tool cabinet.  Also note the cyclone that the Festool CT-22 parks/connects to which is fed through a homemade boom arm.  I can pay in arm and a leg for Lie-Nielsen - but I just can't seem to pull the trigger for comparable Festool stuff.

A English Try square plan and saw till I got from Pop woodworking and from reading Chris Schwarz's material for so long (note the bench, the tool cabinet, saw bench, saw till, and tool rack)

A sharpening pond - my smaller version of one that I saw at the William Ng's website.  Note the maple is from resawn end grain glue ups. 4 different kinds of wood used and a scrap piece of plywood from the old garage that I couldn't throw away!  Now that is frugal!

Also built a cutoff rack underneath the outfeed table and a spindle sander/compressor rolling cabinet (not shown).

Shaker step stool mostly done by hand - a plan from Fine woodworking

Serving trays from cutoffs that I couldn't throw away.  Note the end grain glue up.  A bit clunky for a serving tray - but I couldn't just plane the thickness away!

Finished live edge coffee table.

Sarah's sewing station I did in the spring.  Used the Fuji Semi-Pro 2 HVLP right after I did the Vespa.  I hate painting furniture.
Posted by Picasa

2012 Nov - A slot canyon and bouldering?

Not an ideal time to do The Narrows - but it was definately worth it

 
 
 
 
Posted by Picasa

2012 Nov: Zion

A beautiful hike in Zion 
 
Posted by Picasa

2012 Nov - Good climbing at Kraft boulders

More like great climbing at the Kraft boulders... 
 
Posted by Picasa

2012 Aug - Live edge coffee table

All done by hand since the slab was over 20 inches wide.  Mostly jack plane, but finished flattening with a Lie-Nielsen No. 7.  The mass on this plane was a nice to have.

 
Posted by Picasa

2012 Aug - A new door

A small jig with some hand planes to trim square ebony plugs to size 
 

Nearly finished Mahogany door.  Came from a single slab of Mahogany (except for Sapele panels).  Stained glass panels we got for $5 each from a closeout at a door store.
Posted by Picasa